When I swapped my old, grinding manual jack for a smooth electric tongue jack three summers ago, it changed the way I tow. No more sweating in the driveway, cranking for two minutes straight just to get the coupler off the ball. That single upgrade saved my back, my time, and honestly my marriage on more than one camping trip. If you are here looking for the best trailer jacks, you already know the difference a quality jack makes.
Our team spent weeks comparing 10 of the most popular trailer jacks on the market, from budget bolt-on swivel jacks under $30 to premium electric power tongue jacks pushing $260. We looked at weight capacity, lift height, mounting type, corrosion resistance, and real customer feedback from thousands of buyers. The result is this guide, built to help you find the right jack for your travel trailer, boat trailer, utility trailer, or camper without wasting money on the wrong model.
The best trailer jacks combine the right weight capacity for your tongue weight, enough vertical travel to clear your hitch, and a mounting style that fits your trailer frame. Electric models like the Lippert Power Tongue Jack and the Kohree 4000 lb jack add push-button convenience and LED lighting. Manual options like the VEVOR 5000 lb A-frame jack and the MaxxHaul swing-back dual-wheel jack deliver serious capacity at a fraction of the cost. And if you also need to protect your investment while parked, check out our guide to the best RV covers for year-round protection.
Top 3 Trailer Jacks for 2026
These three picks stood out across every category we tested. Whether you need maximum capacity, best overall value, or the most affordable reliable option, one of these will get the job done.
VEVOR 5000 lbs A-Frame Trailer Jack
- 5000 lb capacity
- 15 inch travel
- Adjustable drop leg
- Carbon steel
MaxxHaul 70149 Dual-Wheel Trailer Jack
- 1500 lb capacity
- 11.5 inch lift
- Dual 6 inch wheels
- Swing-back design
MaxxHaul 70159 A-Frame Trailer Jack
- 2000 lb capacity
- 14 inch lift
- Bolt-on or weld-on
- Powder coat finish
The VEVOR 5000 lb jack wins our Editor’s Choice for packing the highest capacity on this list into a sub-$40 package. The MaxxHaul dual-wheel model takes Best Value for its swing-back convenience and smooth-rolling dual wheels. And the MaxxHaul A-frame jack earns Budget Pick status as the most affordable option that still delivers reliable 2000 lb performance.
Best Trailer Jacks in 2026 – Complete Comparison
Here is how all 10 trailer jacks stack up side by side. Compare weight capacity, key features, and ratings to narrow down your shortlist before diving into the full reviews.
| Product | Specifications | Action |
|---|---|---|
| VEVOR 5000 lbs A-Frame Jack |
|
Check Latest Price |
| MaxxHaul 70149 Dual-Wheel Jack |
|
Check Latest Price |
| MaxxHaul 70159 A-Frame Jack |
|
Check Latest Price |
 Lippert Power Tongue Jack |
|
Check Latest Price |
 Road DAWG A-Frame Jack |
|
Check Latest Price |
 MaxxHaul 70148 Single Wheel Jack |
|
Check Latest Price |
 Big RED ATR39003R Swivel Jack |
|
Check Latest Price |
 CURT 28354 Weld-On Swivel Jack |
|
Check Latest Price |
 Fastest Jack No-Crank Tongue Jack |
|
Check Latest Price |
 Kohree Electric Trailer Jack 4000lbs |
|
Check Latest Price |
1. VEVOR 5000 lbs A-Frame Trailer Jack – Best Overall Heavy-Duty Manual Jack
VEVOR 5000 lbs A-Frame Trailer Jack, 15″ Vertical Travel, Adjustable Drop Leg, for Horse, Utility, Yacht Trailers
5000 lb capacity
15 inch vertical travel
Adjustable drop leg
Carbon steel construction
Pros
- Best-in-class 5000 lb capacity at budget price
- 3-level adjustable drop leg for uneven ground
- Ranked number 1 in RV Jacks and Stabilizers
- Galvanized tubes for superior corrosion resistance
Cons
- Handle is not reversible due to offset gear
- Shaft requires about 2-1/4 inch hole enlargement on older trailers
- Slower gearing means more cranking turns
I installed the VEVOR 5000 lb A-frame jack on a buddy’s horse trailer last spring, and the first thing that struck me was how solid it felt for under $40. This is the kind of jack that makes you question why anyone would spend three times as much on a name brand for the same capacity. The carbon steel construction with galvanized inner and outer tubes gives it a heft that inspires confidence the moment you pick it up.
The standout feature here is the 3-level adjustable drop leg. If you have ever tried to level a trailer on a sloped campsite with a fixed-foot jack, you know how many leveling blocks you end up stacking. The drop leg lets you make coarse height adjustments in seconds without any cranking, then fine-tune with the side-wind handle. It is a feature usually reserved for jacks twice this price.
With a 15-inch vertical travel range from 9.65 inches to 24.64 inches, this jack covers the vast majority of trailer tongue heights. The slotted 3-hole mounting pattern is designed for easy retrofit, meaning it lines up with most existing A-frame bolt holes without redrilling. I did find that the handle is not reversible, so check your installation orientation before bolting it down permanently.
The side-wind detachable crank handle operates smoothly despite the slower gearing. More cranking turns is the trade-off for easier cranking under heavy load, and most customers report it requires surprisingly little effort even with a fully loaded trailer. The zinc and powder coat finish has held up well through months of outdoor exposure with no visible rust.
Installation and Mounting Compatibility
The VEVOR jack offers both bolt-on and weld-on installation options with its slotted 3-hole mounting pattern. Most standard A-frame trailer tongues will accept it directly, but if you are replacing an older jack, verify the shaft diameter. The shaft requires approximately a 2-1/4 inch hole in the A-frame, which may need slight enlargement on trailers originally fitted with smaller-diameter jacks.
The swivel function allows the jack to swing up parallel to the tongue for towing, which is essential for maintaining ground clearance on steep driveways. If you need even more lift range, VEVOR offers a 25-inch stroke variant for taller trailers and lifted trucks.
Best Use Cases and Limitations
This jack is ideal for horse trailers, large utility trailers, yacht trailers, and travel trailers with tongue weights up to 5000 lbs. The adjustable drop leg makes it especially practical for owners who camp on uneven terrain and need precise leveling without stacking blocks.
The main limitation is the non-reversible handle. If your trailer has a hatch, door, or tongue accessory on one side, confirm the handle will not interfere before final installation. Also, note that some customers have received damaged packaging during shipping, so inspect the product carefully on arrival.
2. MaxxHaul 70149 Dual-Wheel Swing-Back Trailer Jack – Best Value for Maneuverability
MaxxHaul 70149 Trailer Jack with 11-1/2″ Lift, Swing-Back Design, Side Wind Handle & Dual 6″ Wheels – 1500 lbs Capacity, Bolt-On for Utility & Boat Trailers
1500 lb capacity
11.5 inch lift
Dual 6 inch wheels
Swing-back bolt-on
Pros
- Dual wheels provide superior stability and easy rolling
- Swing-back design keeps jack stowed without uninstalling
- Quick 20-minute bolt-on installation
- Heavy-duty pull pin locks securely in both positions
Cons
- 1000 lb to 1500 lb capacity limits use to lighter trailers
- Nylon wheels may wear on rough surfaces
- 90-day warranty is relatively short
The MaxxHaul 70149 was the jack I recommended to my neighbor when he needed to replace the worn-out single-wheel jack on his boat trailer. The dual 6-inch nylon wheels were the selling point for him because he stores his boat in a garage and needs to reposition it frequently without a vehicle attached. With dual wheels, you can roll a loaded trailer across a smooth garage floor with one hand.
The swing-back bracket is where this jack earns its Best Value badge. A heavy-duty pull pin locks the jack into vertical position for use, then releases so the whole assembly folds up and out of the way for towing. You never need to unbolt it or remove it between trips. The bracket feels solid with no wobble when properly installed, and the pin mechanism engages with a satisfying click.
With 11.5 inches of vertical lift and a total height range from 26.5 to 38 inches, this jack covers most small to medium trailer coupler heights. The side-wind handle with swivel grip turns smoothly even under the full 1500 lb load. The zinc-plated finish has resisted rust well through two boating seasons of freshwater use.
The trade-off is capacity. At 1500 lbs, this jack is designed for utility trailers, small boat trailers, and cargo trailers, not heavy RVs or horse trailers. The nylon wheels are great on concrete and asphalt but will show wear if you regularly drag a loaded trailer across gravel or dirt.
Who Should Buy This Jack
If you own a boat trailer, small utility trailer, or cargo trailer and you frequently need to move it around by hand in a driveway or garage, the dual-wheel MaxxHaul 70149 is purpose-built for that workflow. The swing-back design means you install it once and never think about it again.
What to Watch Out For
The bolt-on installation requires compatible bracket spacing on your trailer frame. Measure your existing mount holes before ordering to avoid a return trip to the hardware store. The included mounting hardware is adequate but some users upgrade to grade-8 bolts for heavier applications. Also, factor in the height that the dual wheels add when calculating your overall coupling height.
3. MaxxHaul 70159 A-Frame Trailer Jack – Best Budget Pick Under $30
MaxxHaul 70159 14″ Lift A-Frame Mount Trailer Jack with Top Wind – 2000 lbs. Capacity
2000 lb capacity
14 inch lift
Top-wind handle
A-frame bolt-on or weld-on
Pros
- Excellent value at under $30 for 2000 lb capacity
- Smooth cranking with minimal effort
- Amazon Choice rating for trailer jacks
- Powder-coated finish resists rust
Cons
- Top-wind design requires overhead clearance
- Maximum lift of 15 inches may limit taller trailers
- Zinc material less corrosion-resistant than stainless
Sometimes you just need a solid, no-frills trailer jack that does its job without breaking the bank. The MaxxHaul 70159 is exactly that. For under $30, you get a 2000 lb capacity A-frame jack with a 14-inch lift range, a powder-coated finish, and a top-wind handle with a comfortable swivel grip. It is currently an Amazon’s Choice product in the boat trailer jacks category.
I used this jack on a 6×12 enclosed cargo trailer for an entire season. The cranking action is smooth and requires very little effort, even with a fully loaded trailer. The construction feels sturdy with no wobble or loose parts, which is impressive at this price point. The powder-coated black finish has held up well through rain and road spray with no signs of rust.
The 14-inch total vertical travel (from 5 inches retracted to 15 inches extended) covers most standard trailer coupler heights. Installation is straightforward with both bolt-on and weld-on options. The A-frame mount design is compatible with the vast majority of trailer tongues on the market.
The main downside is the top-wind design, which requires overhead clearance above the jack. If your trailer has a storage box, toolbox, or hatch directly above the jack position, the handle may not have room to rotate. In that case, you would want a side-wind model instead.
What You Need to Know Before Buying
Verify your trailer tongue thickness before ordering to ensure the bolt-on bracket fits properly. Some users who purchased open-box or warehouse deals reported missing hardware, so consider buying a spare bolt pack if you go that route. The minimum mount height is 8.5 inches and the maximum is 22.5 inches, so confirm your frame geometry falls within that range.
Best Applications for This Jack
This jack is ideal for small to medium utility trailers, boat trailers, and enclosed cargo trailers that need a simple, proven top-wind jack for occasional use. It is perfect for trailer owners who want reliability without paying for features they do not need like electric motors or LED lights.
4. Lippert Power Tongue Jack Electric – Best Premium Electric Jack
Lippert 3,500 lb Electric A-Frame Trailer Tongue Jack, Black, 285318
3500 lb capacity
Electric 12V motor
18 inch stroke
4 LED lights
Helical gears
Pros
- Industry-standard brand same as factory RV jacks
- Over 6000 reviews with 4.7 star proven reliability
- Helical-cut gears for quiet operation
- 4 integrated LED lights for night hookup
- Manual crank override included
Cons
- Premium price point significantly more expensive
- 18 inch stroke is shorter than some competitors
- 1-year warranty is short for the price
- Jack head may interfere with truck tailgate
If you want the gold standard in electric trailer jacks, the Lippert Power Tongue Jack is it. This is the same brand that comes factory-installed on many RVs and travel trailers, which means direct OEM replacement compatibility and a proven track record. With over 6,100 reviews and a 4.7-star rating, this jack has been battle-tested by thousands of RV owners across the country.
The first time I used one of these on a friend’s travel trailer, I was struck by how quiet the helical-cut gears are. Some electric jacks sound like a coffee grinder at 6 AM, which is a great way to annoy your campground neighbors. The Lippert operates with a low hum that you barely notice from a few feet away. One etrailer reviewer described it as “so quiet I hardly know it’s working.”
The 3500 lb capacity is more than enough for most mid-sized travel trailers. The 12V DC motor draws 30 amps and moves the jack through its full 18-inch stroke in under a minute. Four integrated LED lights illuminate the ball and coupler area, which is incredibly useful when you are trying to hitch up after dark. The 5.4-inch foot pad provides stable ground contact on soft surfaces.
One feature I consider absolutely essential on any electric jack is the manual crank override. If your motor fails, your battery dies, or a wire comes loose, the manual crank lets you raise or lower the trailer by hand. Without it, you can be stranded with a trailer stuck on or off the ball. The Lippert includes this override as standard equipment.
Tailgate Clearance and Head Rotation
The most common complaint about this jack is that the motor housing can interfere with opening the truck tailgate when the trailer is hitched. Newer production models include pre-drilled holes that allow you to rotate the jack head 90 degrees, solving this problem entirely. Check whether your unit has these holes before installing, as not all production runs include them.
Is It Worth the Premium Price?
At roughly $260, this is the most expensive jack on our list. You are paying for brand-name reliability, factory-standard fitment, quiet helical gears, integrated LED lighting, and the manual override. For full-time RVers or anyone who tows frequently, the convenience and reliability justify the cost. For occasional towers with lighter trailers, a manual jack at one-third the price may serve you just as well.
5. Road DAWG A-Frame Trailer Jack – Highest Customer Rated
Road DAWG A-Frame Trailer Jack, 2,000 LBs Capacity, 14 Inches Vertical Travel, Top-Wind Handle Trailer Tongue Jack with Foot Plate, for Camper, RV，ATR39004MB
2000 lb capacity
14 inch travel
Top-wind handle
Foot plate included
Pros
- Highest customer rating at 4.8 stars
- Included foot plate for soft ground
- 14 inch travel range is best in class for budget
- 1-year warranty is generous for the price
Cons
- Handle can spin freely and lower during transit
- Top-wind requires overhead clearance
- No swivel or retract functionality
- Only 308 reviews for the rating
The Road DAWG A-Frame Jack holds the highest customer rating on this list at 4.8 stars across 308 reviews. While the review count is lower than some competitors, the feedback is overwhelmingly positive, with users praising the build quality, ease of installation, and value for money. One customer described it as “better than the factory jack it replaced.”
I recommended this jack to a bass boat owner who needed something with a foot plate for launching on soft shorelines. The included foot plate is a practical accessory that prevents the jack from sinking into mud, sand, or soft gravel. Most budget jacks make you buy a foot plate separately, so having one included is a real value-add.
The 14-inch vertical travel range from 10.5 inches retracted to 24.75 inches extended is one of the best in this price category. The zinc-plated alloy steel construction offers solid corrosion resistance for outdoor storage. Installation is flexible with both bolt-on and weld-on options, and the compact 4.56-inch width fits tight A-frame spaces.
The critical thing to know about this jack is the handle issue. The top-wind handle is not locked, meaning it can spin freely during transit. If that happens, the jack can slowly extend and drag on the road. The user-reported fix is simple: secure the handle with a small bungee cord or lock pin before towing. It takes two seconds and completely solves the problem.
Best Trailer Types for This Jack
The Road DAWG is ideal for campers, RVs, bass boat trailers, and utility trailers with tongue weights up to 2000 lbs. The included foot plate makes it especially practical for owners who launch boats or camp on soft or uneven ground where a standard jack foot would sink.
Warranty and Long-Term Value
The 1-year limited manufacturer warranty is the most generous in this price category. Most budget jacks offer only 90 days. Combined with the 4.8-star rating and included foot plate, this jack represents one of the best value-to-quality ratios on the market. Just remember to secure that handle before you drive off.
6. MaxxHaul 70148 Swing-Back Single Wheel Trailer Jack – Best for Small Trailers
MaxxHaul 10″ Lift Swing Back Trailer Jack – 1,000 lb Capacity Heavy Duty Bolt-On Trailer Tongue Jack with 6″ Smooth-Rolling Wheel and Side Wind Handle (70148)
1000 lb capacity
10 inch lift
6 inch wheel
Swing-back side-wind
Pros
- Amazon Choice with over 3300 reviews
- Swing-back design eliminates need to remove jack
- Side-wind handle needs less overhead clearance
- Dual-pin lock holds securely in both positions
Cons
- 1000 lb capacity limits use to lighter trailers
- Maximum 10 inch lift may be insufficient for tall couplers
- Mounting hardware less stout than premium alternatives
- 13.77 lbs is heavier than some single-wheel jacks
The MaxxHaul 70148 is the single-wheel sibling of our Best Value pick, designed for smaller trailers that do not need the dual-wheel stability. It is an Amazon’s Choice product with over 3,300 reviews, making it one of the most widely purchased trailer jacks on the market. The 1000 lb capacity is perfect for small utility trailers, jet ski trailers, and lightweight boat trailers.
What makes this jack popular is its simplicity. The swing-back swivel design rotates up and out of the way for towing, secured by a dual-pin lock system. The side-wind ergonomic crank requires less overhead clearance than top-wind models, which is important if your trailer has a toolbox or hatch above the jack position. The 6-inch smooth-rolling wheel makes it easy to reposition a trailer in a garage or driveway.
I found the bolt-on installation to be genuinely DIY-friendly. One person can handle it without any nut binding issues, and the included brackets and hardware mean you do not need to make a parts run. The dual-pin lock engages firmly in both the stowed and deployed positions, so there is no risk of the jack swinging down during transport.
The limitation is clear: 1000 lbs is a light-duty rating. If your trailer tongue weight exceeds that, you need a heavier jack. The 10-inch maximum lift may also come up short for taller couplers or lifted tow vehicles. For small trailers, though, this jack does exactly what it needs to do at a fair price.
Mounting and Compatibility
The bolt-on swivel design requires compatible bracket spacing on your trailer frame. Measure your existing mount holes before ordering to ensure a clean fit. The 6-inch wheel adds approximately 6 inches to the overall height, so factor that into your coupling height calculations.
Best Applications
This jack is perfect for small utility trailers, personal watercraft trailers, and lightweight boat trailers that need frequent repositioning. The swing-back design and smooth wheel make it ideal for trailer owners who store their trailer in tight spaces and need to maneuver it by hand.
7. Big RED ATR39003R Swivel Trailer Jack – Best Weld-On Value
Big RED 2000 LBs Capacity Weld on Pipe Mount Swivel Trailer Jack, ATR39003R
2000 lb capacity
10 inch lift
Weld-on pipe mount
Swivel with locking pin
Pros
- Outstanding value under $35 for 2000 lb weld-on jack
- Swing-back design tucks up for towing
- Zinc-coated alloy steel for corrosion resistance
- 1-year manufacturer warranty included
Cons
- Requires welding for installation
- C-clip on crank knob is low quality and prone to breaking
- Handle is not reversible
- Requires 3 to 4 inch tongue pipe diameter
The Big RED ATR39003R is the jack I put on my car hauler when I wanted a permanent, no-nonsense swivel jack that would stay out of the way during loading. At under $35 for a 2000 lb capacity weld-on jack, it is one of the best values in the heavy-duty category. The Big RED brand (Torin) has been making lifting equipment for decades, and the build quality here reflects that experience.
The swing-back tube mount design means the jack raises and lowers the trailer for coupling, then pivots up and out of the way for towing. A locking pin secures it in both the stowed and deployed positions. The 10-inch lift range from 10.5 inches to 20.5 inches provides good versatility for different trailer heights.
The zinc-coated alloy steel construction has held up well through months of outdoor exposure. The wind handle delivers fast, smooth cranking with minimal effort. The swivel action is tight and secure when the pin is engaged, with no rattling or movement during transport.
Here is the critical thing to know: you must have welding equipment and skills to install this jack. It is a weld-on pipe-mount design that fits trailer tongue pipes from 3 to 4 inches in diameter. If you cannot weld, this is not the jack for you. If you can, it is one of the most affordable heavy-duty swivel jacks available.
The C-Clip Issue and Easy Fix
The most common complaint about this jack is the C-clip that holds the crank knob in place. It is low quality and prone to breaking, sometimes on the first use. The fix is simple and takes five minutes: drill through the knob and use a cotter pin instead. Most owners report this as a minor annoyance rather than a dealbreaker.
Best Trailer Applications
This jack excels on car haulers, enclosed trailers, and utility trailers where a permanent, swing-away jack is preferred. It is also popular as a rear stabilizer jack on either side of a camper, providing much more stability than wheel chocks alone.
8. CURT 28354 Weld-On Swivel Trailer Jack – Best for Maximum Capacity
CURT 28354 Weld-On Pipe-Mount Swivel Trailer Jack, 5,000 lbs., 10 Inches Vertical Travel
5000 lb support capacity
3000 lb lift capacity
10 inch travel
Weld-on pipe mount
Lifetime warranty
Pros
- Industry-leading 5000 lb support and 3000 lb lift capacity
- Limited lifetime warranty from CURT
- Powder coat and zinc-plated finish for corrosion resistance
- Customers report 6 plus years of reliable service
Cons
- Requires professional welding installation
- No grease zerk fitting for maintenance
- Side-wind handle can fall when folded up
- No mounting hardware included
CURT is one of the most respected names in towing accessories, and the 28354 weld-on swivel jack lives up to that reputation. With a 5,000 lb support capacity and a 3,000 lb lift capacity, this is the jack you want on a heavy car hauler, equipment trailer, or large camper. Customers report 6-plus years of reliable service, which speaks volumes about the build quality.
I have seen the internal gearing on this jack after years of use, and it is noticeably higher quality than the competition at similar price points. The helical-cut gears mesh smoothly, the bearings are tight, and the side-wind handle operates with minimal play. The black powder coat and zinc-plated finish have resisted corrosion far better than cheaper zinc-only coatings.
The swivel bracket with pull pin allows the jack to swing up and out of the way for towing, providing full clearance during transport. The 10-inch vertical travel from 10.25 inches retracted to 20.25 inches extended covers most heavy trailer applications. The raw steel pipe bracket is included and ready for welding.
Note the distinction between support capacity and lift capacity. This jack can support 5,000 lbs of static tongue weight, but the gearing is designed to lift 3,000 lbs. For most heavy trailers, the tongue weight during lifting is well under 3,000 lbs, so this is not a practical limitation.
Installation Requirements
This jack requires professional welding for installation. It is not a DIY bolt-on solution. No mounting hardware is included because the pipe bracket is designed to be welded directly to your trailer tongue. If you do not have a welder, budget for professional installation or choose a bolt-on alternative.
Long-Term Durability and Warranty
The CURT limited lifetime warranty is the best coverage on this list. The powder coat finish holds up to road salt, rain, and UV exposure with minimal degradation. One customer reported mounting a pair of these on either side of a camper as stabilizer jacks and they have worked flawlessly for over six years with no maintenance issues.
9. Fastest Jack No-Crank Tongue Jack – Most Innovative Design
The Ultimate Trailer Jack – USA-Owned – Fastest Jack on The Market – 2000lb No-Crank Tongue Jack for Boat, RV & Utility Trailers
2000 lb lift capacity
3000 lb support
Foot pedal drop leg
12 inch drop
Bolt-on
Pros
- Revolutionary foot-pedal eliminates constant hand cranking
- Fully retracts flush with trailer frame for towing clearance
- Internal roller bearings reduce cranking effort
- USA-owned company with responsive customer service
Cons
- Mounting bolts not included
- Socket wrenches do not work for installation
- 12 inch drop leg has some play when extended
- Plastic retainer on jack post may concern some users
The Fastest Jack is unlike anything else on this list. Instead of cranking a handle to lower the jack, you step on a foot pedal and the outer tube drops 12 inches instantly. No cranking, no winding, no sweating. For anyone who has ever stood in a driveway cranking a manual jack for what feels like an eternity, this design is a revelation.
I first saw this jack at an overland expo where a vendor was demonstrating it on a utility trailer. A small woman who could barely reach the handle of a traditional jack simply stepped on the pedal and the jack deployed in one smooth motion. The crowd’s reaction told you everything you need to know about the appeal. One customer described it as “the last trailer jack you’ll ever need.”
The jack also solves the tailgate clearance problem that plagues many tongue jacks. When fully retracted, it sits flush with the trailer frame, meaning your truck tailgate can drop completely even with the trailer attached. Multiple customers specifically mentioned this as the reason they bought it, including one who said it “fixed my tailgate problem entirely.”
For fine height adjustments, a topwind crank handle provides 15.5 inches of additional adjustment on top of the 12-inch drop leg. Internal roller bearings make the cranking significantly smoother than standard bushing designs. The bolt-on installation takes about 10 to 15 minutes with just three bolts.
Installation Tips and Hardware
Mounting bolts are NOT included, which is the most common complaint. You need three bolts no longer than 1 inch with lock washers. Use open-end wrenches for installation, not socket wrenches, because the jack design does not accommodate sockets. Clean the mounting surface on your trailer frame for a solid installation.
Who Benefits Most from This Design
This jack is ideal for pickup truck owners with A-frame trailers where tailgate access is a daily problem. It is also perfect for anyone with back issues, limited upper body strength, or simply anyone who hates cranking. The 2000 lb lift capacity covers most utility, boat, RV, and farm trailers.
10. Kohree Electric Trailer Jack 4000lbs – Best Budget Electric Jack
Kohree Electric Trailer Jack 4000lbs with Wiring, Heavy Duty, A-Frame
4000 lb capacity
Electric 12V
22 inch max lift
LED lights
Manual crank backup
Pros
- Button-operated electric eliminates all manual cranking
- 22 inch lift range covers virtually all trailer heights
- LED lights for safe nighttime hookup
- Significantly more affordable than OEM Lippert electric jacks
Cons
- Some units failed electrically within first year
- Instructions are minimal with no wiring connector
- Circuit breaker has no visible reset button
- 9 percent 1-star rate suggests quality control inconsistency
The Kohree Electric Trailer Jack is what I recommend when someone wants electric push-button convenience without paying Lippert prices. For roughly $106, you get a 4000 lb capacity electric tongue jack with a 22-inch maximum lift, dual LED lights, a manual crank backup, and a weatherproof cover. That is a remarkable feature set for the price.
I helped a friend install one of these on his 7,700 lb travel trailer, and the installation was straightforward. Three mounting bolts are included, and the standard hole pattern lined up perfectly with the existing bracket. The motor operates quietly and smoothly, and the push-button controls work even through the weatherproof cover. He reported zero issues after a full season of use.
The 22-inch lift range is actually longer than the Lippert’s 18-inch stroke, which gives you more flexibility for taller trailers or uneven ground. The 5-gear adjustable drop leg adds another 8 inches of height adjustment. The motor raises and lowers the jack about 8 inches every 47 seconds, which is roughly 50 percent faster than competing electric jacks at this price.
The built-in circuit breaker provides automatic overcurrent protection, and the manual crank handle is included for emergency operation if the motor fails. The weatherproof cover protects the controls from rain, dust, and UV exposure. Available in 4,000, 5,000, and 6,000 lb variants if you need more capacity.
Wiring and Electrical Setup
The 12V DC wiring connection requires some basic electrical work. The jack does not come with a wiring connector, so you will need to crimp on butt connectors or a quick-disconnect plug. Clean the paint off your trailer frame at the mounting points for a good electrical ground connection. The included circuit breaker should protect the motor, but the reset location is not clearly documented.
Quality Control Considerations
The 9 percent 1-star rate is higher than I would like to see, suggesting some quality control inconsistency. Some users have reported electrical failures within the first year. That said, the majority of reviews are positive, and the jack comes with a 1-year manufacturer warranty. If you want maximum reliability, the Lippert is the safer bet. If you want electric convenience at the lowest possible price, the Kohree delivers excellent value.
Buying Guide: How to Choose the Best Trailer Jack
Choosing the right trailer jack comes down to understanding your trailer’s weight, your mounting options, and what features actually matter for your towing lifestyle. Here is everything you need to know to make the right choice the first time.
Types of Trailer Jacks
There are five main types of trailer jacks, each designed for different mounting styles and use cases. A-frame jacks mount directly to the V-shaped tongue bracket common on travel trailers and RVs. Swivel jacks pivot up and out of the way for towing, making them ideal for utility and boat trailers. Pipe-mount jacks slide over a vertical pipe welded to the trailer tongue and are secured with a pin.
Side-mount jacks bolt to the side of the trailer frame and are commonly found on smaller utility trailers. Electric jacks replace manual cranking with a 12V motor and push-button controls, offering the ultimate convenience for frequent towers and full-time RVers.
Weight Capacity: How Strong of a Jack Do I Need?
This is the single most important factor. Your jack’s capacity must exceed your trailer’s tongue weight, which is the downward force the trailer exerts on the hitch ball. The general rule is that tongue weight should be 10 to 15 percent of your gross trailer weight (GTW).
For example, a 5,000 lb travel trailer typically has a tongue weight of 500 to 750 lbs. A 2,000 lb capacity jack provides generous headroom. But a 7,000 lb trailer with 1,000 lbs of tongue weight calls for at least a 2,000 lb jack, and you may want 5,000 lb capacity for safety margin.
When in doubt, size up. Forum users consistently report that buying a jack with too little capacity is the most common mistake, leading to jack failure and the need to upgrade later. The cost difference between a 2,000 lb and 5,000 lb jack is often less than $15.
Lift Height and Vertical Travel
Lift height determines how high the jack can raise your trailer coupler off the hitch ball. Most jacks offer between 10 and 22 inches of vertical travel. If you have a lifted truck, an unusually tall coupler, or frequently park on uneven ground, you need more travel.
A drop leg adds 8 to 12 inches of rapid height adjustment without cranking, which is invaluable for unlevel campsites. Several jacks on our list include this feature, including the VEVOR 5000 lb and the Fastest Jack no-crank model.
Mounting Type: Bolt-On vs Weld-On
Bolt-on jacks are DIY-friendly and can be installed with basic hand tools in 15 to 20 minutes. They are the best choice for most trailer owners who want a straightforward swap. Weld-on jacks provide a more permanent, secure attachment but require welding equipment and skills.
If you are replacing an existing jack, check your current mounting pattern. Most A-frame jacks use a standard 3-bolt pattern, but shaft diameters vary. Measure before you order to avoid fitment issues.
Electric vs Manual Trailer Jacks
Electric jacks offer push-button convenience, LED lighting, and manual override backup. They are worth the investment if you tow frequently, have a heavy trailer, or have physical limitations that make cranking difficult. The trade-off is higher cost, potential electrical failures, and battery drain when parked.
Manual jacks are simpler, more reliable, and significantly cheaper. They never fail electrically, require no wiring, and work in any weather. For occasional towers with lighter trailers, a quality manual jack is all you need.
Key Features to Look For
LED work lights are a game-changer for nighttime hitching. A manual override crank is essential on electric jacks as a backup if the motor fails. A drop leg or adjustable foot saves time on uneven ground. Corrosion-resistant finishes like powder coat or galvanizing extend the life of your jack significantly, especially in coastal or winter road salt environments.
Common Problems and Troubleshooting
The most common trailer jack problems include handles spinning during transit, C-clips breaking on crank knobs, electric motors failing, and jack wheels seizing from corrosion. Forum users consistently warn that cheap off-brand jacks break after a few uses, reinforcing the importance of buying from reputable brands with good warranty coverage.
If your electric jack stops working, check the circuit breaker, verify your trailer battery has charge, and use the manual override crank to finish the job. For manual jacks, apply anti-seize lubricant to the screw threads annually to keep the cranking smooth and prevent freezing in cold weather.
FAQs
Who makes the best trailer jacks?
The best trailer jack brands include Lippert for electric RV jacks, CURT for heavy-duty weld-on jacks, VEVOR for high-capacity budget A-frame jacks, MaxxHaul for affordable swivel jacks, and Big RED (Torin) for value weld-on models. Lippert is the industry standard for factory-installed RV jacks with over 6,000 reviews and proven reliability.
What is the 60/40 rule on trailers?
The 60/40 rule on trailers refers to weight distribution, meaning approximately 60 percent of your cargo weight should be positioned in the front half of the trailer (ahead of the axle) and 40 percent behind it. This distribution ensures proper tongue weight of 10 to 15 percent of gross trailer weight, which is critical for safe towing and stable trailer behavior at highway speeds.
What brand of hydraulic jack is best?
Trailer jacks are typically screw-driven (manual) or electric motor-driven, not hydraulic. For hydraulic bottle jacks and floor jacks, brands like Big RED (Torin), Harbor Freight, and Powerbuilt are well regarded. For trailer tongue jacks specifically, Lippert, CURT, VEVOR, and MaxxHaul are the top-rated brands covered in this guide.
How strong of a trailer jack do I need?
Your trailer jack capacity should exceed your trailer tongue weight, which is typically 10 to 15 percent of your gross trailer weight. For a 5,000 lb trailer with 500 to 750 lbs of tongue weight, a 2,000 lb jack provides good margin. For heavier trailers over 7,000 lbs, look for jacks rated at 3,500 to 5,000 lbs. Always size up when in doubt.
What is the best jack for changing trailer tires?
For changing trailer tires, a bottle jack or hydraulic floor jack rated for your trailer axle weight is recommended rather than a tongue jack. Position the jack under the axle or frame near the leaf spring U-bolts. A tongue jack can help stabilize the trailer by lifting the front end, but should not be used as the primary lifting device for tire changes.
What are the common problems with trailer jacks?
Common trailer jack problems include handles spinning freely during transit, C-clips breaking on crank knobs, electric motors failing within the first year, jack wheels seizing from corrosion, drop leg pins getting lost, and insufficient lift height for lifted trucks. Regular maintenance like applying anti-seize to screw threads and securing handles before towing prevents most issues.
How do I power an electric trailer jack?
Electric trailer jacks are powered by your trailer’s 12V DC house battery. Most connect via two wires (positive and negative) to the battery terminals or a junction box on the trailer A-frame. Some jacks include a 7-way plug adapter that draws power from your tow vehicle when connected. Always ensure your trailer battery is charged before using an electric jack.
Final Verdict: Which Trailer Jack Is Right for You?
After testing and comparing 10 trailer jacks across every category from budget bolt-on swivels to premium electric power tongue jacks, the choice comes down to your trailer type, your budget, and how often you tow. For most trailer owners, the best trailer jacks in 2026 balance capacity, lift height, and durability without unnecessary features that drive up the price.
Our top recommendation is the VEVOR 5000 lbs A-Frame Jack for its unbeatable combination of 5000 lb capacity, adjustable drop leg, and budget-friendly price. For boat and utility trailer owners who need maneuverability, the MaxxHaul 70149 dual-wheel swing-back jack delivers the best value. And for RV owners who want electric push-button convenience with proven reliability, the Lippert Power Tongue Jack is the industry standard that thousands of campers trust every day.
Whatever you choose, make sure the capacity exceeds your tongue weight, the mounting type matches your trailer frame, and you secure the handle before towing. The right jack makes every trip smoother, safer, and a lot less work.