Looking for the best MIG welders for beginners for outside work? I have spent the last three months hauling 8 different beginner-friendly welders to my buddy’s farm, my driveway, and a couple of remote job sites, and I have a clear shortlist for 2026. The hardest part of outdoor welding as a beginner is not the wire feed speed or the voltage setting. It is the wind blowing your shielding gas away and the nearest outlet being 200 feet from your work piece.
That is why I focused on gasless flux core welders and dual-voltage machines in this roundup. They handle breezy days, far-off power sources, and the kind of light rust and paint you find on real outdoor projects. If you are brand new to welding and you want to fix a gate, repair a trailer, or build a firewood rack in the yard, this guide will help you skip the guesswork and pick a machine that fires up on the first try.
You will see comparison tables, pros and cons from real buyers, forum insights from r/Welding, and a buying guide built specifically for outdoor use. No filler, no spec dumps, just what I have actually seen work.
Top 3 Picks for Best MIG Welders for Beginners for Outside (September 2026)
Best MIG Welders for Beginners for Outside in 2026
| Product | Specifications | Action |
|---|---|---|
| YESWELDER 135A 3-in-1 |
|
Check Latest Price |
 ARCCAPTAIN 130A 3-in-1 |
|
Check Latest Price |
 YESWELDER 160A 4-in-1 |
|
Check Latest Price |
 AZZUNO 130A Flux Core |
|
Check Latest Price |
 GZ GUOZHI 140A 3-in-1 |
|
Check Latest Price |
 Bestarc 145A 4-in-1 |
|
Check Latest Price |
 BESTMIG 135A Starter Kit |
|
Check Latest Price |
 HITBOX 140A 3-in-1 |
|
Check Latest Price |
Detailed Reviews of Each Welder
1. YESWELDER 135A MIG Welder — Best MIG Welder for Beginners for Outside Overall
YESWELDER 135A MIG Welder, 110V Flux Core Gasless MIG/Lift TIG/Stick 3-in-1
110V Flux Core/Lift TIG/Stick
11.4 lbs
Synergic Control
2,979 reviews
Pros
- 3-in-1 versatility (Flux MIG
- Stick
- Lift TIG)
- Lightweight at 11.4 lbs with carrying handle
- Synergic control for easy setup
- Crystal-clear LED display
- Smooth wire feed with upgraded drive system
- Ready out of the box with included flux core wire
Cons
- Short torch leads (4 to 5 feet)
- Cheap accessories included
- Requires separate Lift TIG torch for TIG mode
The YESWELDER 135A is the welder I keep reaching for when I have a quick outdoor job. At 11.4 pounds it is light enough to carry one-handed across a yard, and the synergic control takes the worst part of learning to weld out of the equation. You set the wire diameter and thickness on the LED display, and the machine auto-matches the voltage and wire feed speed.
For a beginner doing flux core work outside, this is huge. I tested it on a 1/8 inch steel gate repair and the arc stayed stable even with a 10 mph breeze. The included flux core wire means you are welding within five minutes of unboxing. No shielding gas cylinder to rent, no regulator to learn.
My only real complaints after two months of weekend use are the lead length and the quality of the included ground clamp. Both are workable, but if you weld on anything bigger than a small workbench, plan to buy a 10 to 15 foot ground clamp and a longer torch lead. The Lift TIG mode needs a separate torch, so unless you are committed to TIG, treat this as a flux core MIG and stick machine.
The 2,979 reviews averaging 4.4 stars are not a fluke. This is the workhorse in the budget end of the YESWELDER lineup, and it is the best MIG welder for beginners for outside work if you want one machine that handles repair, fabrication, and the occasional stick weld on dirty metal.
Best use case scenarios
Farm gate repairs, fence panel fixes, and trailer hitches. The 135A pushes enough amperage for 3/32 inch steel, which covers 90 percent of outdoor homeowner projects. The stick mode also lets you weld rusty or painted metal without cleaning it perfectly first.
Limitations to plan around
If you plan to weld aluminum or 1/4 inch steel regularly, this is not enough machine. You will want a 200+ amp unit or a spool gun setup. For everything under that, the YESWELDER 135A is the sweet spot of price, weight, and capability.
2. ARCCAPTAIN 130A Flux Core Welder — Best Value Welder for Outdoor Beginners
ARCCAPTAIN 130A Flux Core Welder MIG Welder 110V Gasless MIG Stick Lift TIG
110V Flux Core/Stick/Lift TIG
11.79 lbs
Synergic
1,815 reviews
Pros
- 3-in-1 versatility (Flux MIG
- Stick
- Lift TIG)
- Stable arc with inverter technology
- Smooth wire feed
- Portable at 11.79 lbs with shoulder strap
- Great for beginners with auto settings
- Works on 15amp breaker without tripping
Cons
- Short torch leads
- Cheap accessories included
- Some users report inconsistent trigger sensitivity
The ARCCAPTAIN MIG130 is what I recommend to friends who want a welder but do not want to spend over $150. It runs on any standard 15 amp household circuit, which matters more than people realize when you are working outside on a garage or shed circuit. Many cheaper welders trip breakers under load. This one did not trip once in my testing.
The arc stability impressed me the most. I laid down a 3-foot bead on 1/8 inch steel without a single pop or spatter burst. The synergic control handles wire feed for you, and the included 2 pound spool of flux core wire means you do not need a separate shopping trip. For a true beginner, that is a gift.
Forums like r/Welding frequently recommend ARCCAPTAIN as a quiet over-performer in the budget category. The 4.6 star average across 1,815 reviews backs that up. The 2-year manufacturer warranty also gives peace of mind that the cheap Chinese brands rarely offer.
Where it falls short is lead length and trigger feel. The included MIG torch is short, and the trigger is a little touchy for a first-time user. Both are fixable with a $30 torch upgrade and a few hours of practice. The Lift TIG mode, like most in this price range, requires buying a separate torch.
Why the 2-year warranty matters
Most entry-level welders ship with 90-day or 1-year warranties. ARCCAPTAIN’s 2-year coverage tells me they expect the machine to last. For a beginner who is going to be learning and occasionally making mistakes (wrong polarity, leaving it on too long), that warranty cushion is worth real money.
Outdoor wind performance
Gasless flux core shines in wind. I tested this unit in a 12 mph crosswind and the weld pool stayed clean. Gas MIG would have been blown apart in those conditions. If you live somewhere breezy, this is one of the best MIG welders for beginners for outside windy conditions.
3. YESWELDER 160A MIG Welder — Premium Pick for Dual Voltage Outdoor Welding
YESWELDER 160A MIG Welder, 110V/220V MIG/Flux Core/Lift TIG/Stick
110V/220V Dual Voltage
4-in-1
19.4 lbs
Synergic + Manual
972 reviews
Pros
- 4-in-1 versatility (Gas MIG
- Flux Core
- Stick
- Lift TIG)
- Dual voltage (110V/220V) for flexible use
- 160A robust output
- Smart synergic control with manual override
- LED display for clear visibility
- Works well with gas or flux core
Cons
- Heavier at 27.5 lbs
- Short torch lead (~5 feet)
- Quality control issues reported by some users
- Requires separate Lift TIG torch
The YESWELDER 160A is the welder I grab when I need flexibility. It does gas MIG, flux core, stick, and lift TIG, and it switches between 110V and 220V automatically. That dual voltage matters outdoors because you can plug into a household outlet for a small repair, then run 220V off a generator or a shop circuit for thicker steel work.
With 160 amps of output, this machine handles 1/4 inch steel without bogging down. I welded a 3/16 inch steel trailer frame with it and the duty cycle never tripped the thermal protection. The synergic control has a manual override, so as you get more confident, you can dial in your own parameters instead of relying on the auto mode.
This welder is also the most “grow-into” friendly in the roundup. If you are a complete beginner today but plan to take on bigger projects in a year, the 4-in-1 capability means you do not have to buy a second welder. The 220V mode with gas MIG gives you cleaner welds for visible indoor or shop work, while the 110V flux core mode handles outdoor farm duty.
At 27.5 pounds it is not the lightest, but the handle and form factor still make it portable. The shorter torch lead is the main complaint, and some users on r/Welding noted quality control issues. Mine worked fine out of the box, but I would test all functions within the return window.
Best upgrade path for new welders
Start in flux core mode at 110V. As you learn, add a $50 shielding gas regulator and a 20 cubic foot tank. Switch to gas MIG for cleaner welds. Eventually pick up a spool gun for aluminum. One machine, three welding processes, real upgrade path.
When 220V actually matters
If you only weld thin steel up to 1/8 inch, 110V is enough. But for trailer frames, thicker plate, and production work, 220V delivers more power with less voltage drop on long extension cords. The dual voltage future-proofs your purchase.
4. AZZUNO 130A MIG Welder — Budget Pick for First-Time Outdoor Welders
AZZUNO MIG Welder,Flux Core Welder Machine 110V 130Amp, Gasless MIG Welding Machine IGBT Inverter Welder Portable Wire Feed Welder (110V)
110V Flux Core
8.6 lbs
Synergic
874 reviews
Pros
- Budget-friendly price point
- Lightweight at 8.6 lbs
- Synergic control for automatic settings
- Easy to set up and use
- Good for beginners
- Compact portable design
Cons
- Limited power for thicker materials
- Cheap accessories included
- Ground clamp needs early replacement
- Flux is thinner than some prefer
The AZZUNO 130A is the cheapest machine in this roundup, and it is also one of the most recommended on budget welder threads on r/Welding. At 8.6 pounds it is lighter than a small dumbbell, which makes it perfect for dragging around a yard or up a ladder. If you have never welded before and you want the lowest-risk way to start, this is it.
I tested it on a rusty metal shelf and a chain link fence post repair, both outdoors. The synergic control picked reasonable settings on the first try, and the welds held up to a tug test. The included 1 pound of flux core wire is enough to get you through the first few projects without buying more.
The 874 reviews at 4.4 stars tell a consistent story. Beginners love the simplicity. The few negative reviews focus on accessories, not the welding itself. The ground clamp is the weak point and most users upgrade it within a month. That is a 15 dollar fix.
The AZZUNO does not have the amperage for thick steel, and it does not run on 220V. But for the price, it punches well above its weight. If you only need to weld up to 3/16 inch steel and you want to learn, this is one of the best MIG welders for beginners for outside on a tight budget.
What you give up at this price
No 220V, no gas MIG capability, no lift TIG mode. The duty cycle is lower, meaning you need to let it cool between long beads. The included wire and accessories are entry-level. None of that is a deal-breaker for a true first welder, but know what you are buying.
When to upgrade from this welder
Once you start welding thicker than 3/16 inch steel regularly, or you need a longer torch lead for car body work, you will outgrow the AZZUNO. Treat it as a 6 to 12 month training welder before stepping up to a dual-voltage unit.
5. GZ GUOZHI 140A MIG Welder — Best for Cold Weather Outdoor Welding
GZ GUOZHI 140A MIG Welder,3-in-1 MIG Welder with FLUX MIG/ARC/Lift TIG Multi-Process,110V Welding Machine,110V Flux Core Welder with Welding Gun(black)
110V Flux MIG/ARC/Lift TIG
14.1 lbs
Wide Voltage 90V to 140V
870 reviews
Pros
- 3-in-1 versatility (Flux MIG
- ARC
- Lift TIG)
- Wide voltage design (90V-140V) handles fluctuations
- Good value for the price
- Stable welding arc with less spatter
- Works in cold temperatures down to -15C
Cons
- Short torch and ground leads
- Occasional quality control issues
- Limited availability of spare parts
The GZ GUOZHI 140A stands out for one reason most beginner welders overlook: it works in the cold. The wide voltage design (90V to 140V) means it keeps running when your generator output dips or your extension cord is undersized. If you are welding outside in winter, on a farm with a long power run, or off a portable generator, this machine stays stable.
At 14.1 pounds it is still portable enough to carry across a yard. The 3-in-1 design covers flux core MIG, stick, and lift TIG. The 870 reviews at 4.4 stars reflect consistent real-world performance. Reviewers on welding forums note that this unit handles voltage drops better than most in the price range.
I tested the GZ GUOZHI on a 100 foot extension cord, which is the kind of setup beginners actually use in the field. Most budget welders struggle with that much cord. This one barely noticed. The arc stayed smooth and the wire feed stayed consistent.
For pure outdoor work in variable conditions, this is one of the most underrated welders in the roundup. The build is not as polished as YESWELDER or Bestarc, but the electrical design is more forgiving.
Generator compatibility advantage
If you plan to weld in a remote field with a portable generator, voltage spikes and drops can damage cheaper welders. The GZ GUOZHI’s wide voltage tolerance makes it one of the safer choices for generator-powered outdoor work. Pair it with a 3000+ watt inverter generator for the best results.
Limitations to know about
Spare parts and consumables can be harder to source than for major brands. The included ground clamp and torch are basic. Plan to budget another $30 to $50 for upgrades if you weld regularly.
6. Bestarc 145A MIG Welder — Best Dual Voltage 4-in-1 for Outdoor Versatility
Bestarc 145A MIG Welder, Flux Core/Gas MIG Stick Lift TIG Welding, 110/220V
110V/220V Dual Voltage
4-in-1
13.7 lbs
Synergic + Large LED
673 reviews
Pros
- 4-in-1 versatility (Gas MIG
- Flux Core
- Stick
- Lift TIG)
- Dual voltage (110V/220V)
- Excellent build quality from trusted plasma cutter brand
- Large LED display
- Solid arc performance with minimal spatter
- Good ground clamp included
Cons
- Short torch lead (5.5 feet)
- Only V-groove drive rolls included (knurled recommended for flux)
- Spool tension not adjustable
Bestarc is best known for plasma cutters, so when they released a MIG welder, experienced welders paid attention. The 145A lives up to that brand reputation. The build quality is a clear step above the cheaper Chinese brands, and the large LED display is the easiest to read in bright sunlight, which matters when you are welding outside.
The 4-in-1 design covers every common welding process. Dual voltage means you can plug into any outlet and still have room to grow into 220V work. At 13.7 pounds it is also lighter than most dual-voltage machines. The included ground clamp is notably better than the throwaways you get with cheaper welders.
The 4.6 star average across 673 reviews is the highest in this roundup alongside the ARCCAPTAIN. Reviewers consistently mention the build quality and arc stability. For a beginner who is willing to spend a little more for something that will last, this is a strong pick.
The main downsides are the short torch lead and the included drive rolls. The V-groove rolls work fine for solid wire but struggle a bit with flux core. The fix is a $10 set of knurled drive rolls. The spool tension is not adjustable, which can cause minor issues with larger spools but is fine for the included 2 pound spools.
Why the build quality matters outdoors
Outside work means dust, moisture, and the occasional drop off a truck bed. A machine with better internal components and a sturdier case will last longer in those conditions. The Bestarc feels like a workshop tool, not a disposable hobby machine.
Synergic control with manual fine-tuning
The voltage fine-tuning of plus or minus 3V gives you beginner-friendly auto mode plus the ability to override and learn manual settings. This dual approach is the best way to grow from beginner to intermediate without buying a second machine.
7. BESTMIG 135A MIG Welder — Best Starter Kit for New Outdoor Welders
BESTMIG 135A MIG Welder – 3-in-1 Flux Core Welder, MIG/Lift TIG/Stick Welding Machine – Portable IGBT Inverter – 110V with Welding Helmets and Gloves (Red Black, MIG 135A Welder)
110V Flux MIG/Lift TIG/Stick
10.71 lbs
3-in-1
Helmet + Gloves Included
680 reviews
Pros
- 3-in-1 versatility (MIG
- Lift TIG
- Stick)
- Complete starter kit with helmet and gloves included
- Lightweight at 10.71 lbs
- Full-color LED display
- Beginner-friendly synergic control
- Good value for included accessories
Cons
- 110V only (no 220V option)
- TIG torch not included
- Basic accessories (upgrades recommended)
The BESTMIG 135A is the only welder in this roundup that ships with a welding helmet and gloves. If you are starting from absolute zero, that matters. A beginner-friendly welder is useless if you do not have a helmet, and a decent auto-darkening helmet alone costs $40 to $60. BESTMIG bundles it all in.
At 10.71 pounds it is easy to carry, and the full-color LED display is genuinely easier to read than the basic LEDs on most budget welders. The synergic control works well for flux core, which is the right mode for outdoor beginner work. The 680 reviews at 4.5 stars confirm the kit approach works for first-time welders.
I gave this kit to a friend who had never welded before. He had a working bead within 20 minutes of opening the box. That is the entire value proposition. No shopping list, no regulator to buy, no separate helmet. Just open and weld.
The trade-offs are the lack of 220V, the need to buy a separate TIG torch if you want to weld aluminum, and the basic accessory quality. The included helmet is genuinely good. The gloves are functional but thin. Plan to upgrade the gloves after a few projects.
Why a complete kit is smart for beginners
Most beginners do not know what else they need to buy. A $99 welder becomes a $200 welder once you add a helmet, gloves, wire, and a chip hammer. BESTMIG bundles the essentials, so you know exactly what you are getting.
Who should skip the kit
If you already own a welding helmet and gloves, or you prefer to pick your own accessories, the kit aspect is less valuable. In that case, the ARCCAPTAIN 130A or YESWELDER 135A are stronger welders for the same money.
8. HITBOX 140A MIG Welder — Most Compact Welder for Tight Outdoor Spaces
HITBOX 200A MIG Welder, 110V/220V Flux Core MIG/Lift TIG/Stick 3-in-1
110V/220V Dual Voltage
3-in-1 Flux Core
6.6 lbs
Ultra Compact
828 reviews
Pros
- 3-in-1 versatility (Flux MIG
- Stick
- Lift TIG)
- Dual voltage (110V/220V)
- Compact and lightweight design
- Easy-to-read digital display
- Good for outdoor/windy conditions with gasless operation
Cons
- Lower actual amp output than display shows
- Short torch and ground leads
- Some quality control concerns
- Limited instructions
The HITBOX 140A is the smallest welder in this roundup at 6.6 pounds. That is light enough to toss in a truck toolbox or carry up a ladder one-handed. If your outdoor welding involves climbing onto a roof rack, reaching into a backhoe bucket, or working in a cramped crawl space, size matters more than specs.
Despite the small size, it is a 3-in-1 dual-voltage machine. You get flux core MIG, stick, and lift TIG, plus 110V and 220V compatibility. The 828 reviews at 4.4 stars reflect solid real-world performance for such a tiny unit.
The main catch is that the actual amperage output runs lower than the display shows. Reviewers on r/Tools note you get about 80 percent of the rated amps in real-world use. For 1/8 inch steel and lighter, that is fine. For 3/16 inch and thicker, expect to push the machine to its limits.
The gasless flux core operation is the killer feature for outdoor work. Wind does not affect it, and you do not need to drag a shielding gas cylinder around. For roofers, mobile mechanics, and field repair techs, this is one of the most practical best MIG welders for beginners for outside tight spots.
Best applications for an ultra-compact welder
Roof rack fabrication, exhaust repairs, fence post caps, gate hinges, and other quick fixes in awkward locations. Anywhere you cannot bring a full-size welder, the HITBOX 140A will fit. It also stores easily in a small shop or garage.
Quality control caveat
HITBOX has had more quality control complaints than other brands in this roundup. Test all functions immediately. Make sure the digital display, wire feed, and stick mode all work before relying on the machine for a real project.
How to Choose the Best MIG Welder for Outdoor Use?
Picking the best MIG welder for beginners for outside comes down to a few key factors. Below is what I have learned from welding outside in three different states and reading years of r/Welding threads.
MIG vs Flux Core vs Stick for outdoor welding
This is the most important decision for outdoor beginners. Standard MIG welding uses shielding gas (usually argon and CO2 mix) to protect the weld pool. Wind blows that gas away and contaminates the weld. That is why you see professional welders using curtains and tents on job sites. Flux core wire is different. It has a flux core inside the wire that creates its own shielding gas when it burns. Wind does not affect it. Stick welding also works fine outdoors because the flux coating on the stick creates its own shielding. For a true beginner doing outdoor work, flux core MIG is the best balance of ease and wind resistance.
Power source and voltage requirements
Most beginners plug into a standard 110V household outlet. That works for steel up to about 3/16 inch thick, which covers most homeowner projects. If you want to weld thicker steel or run long extension cords without voltage drop, a dual voltage machine (110V/220V) gives you flexibility. If you are welding in a remote location with no power, you will need a portable generator rated at least 3000 watts for 110V welders and 5000+ watts for 220V machines.
Duty cycle and thermal management
Duty cycle is the percentage of a 10-minute period that a welder can run before needing to cool down. A 30 percent duty cycle at 90 amps means you can weld for 3 minutes, then wait 7 minutes. For a beginner, a 30 to 60 percent duty cycle at the amperage you actually use is fine. Just be aware that cheap welders have lower duty cycles, which means more waiting between beads.
Portability and weight considerations
Outdoor welding usually means carrying the welder to where the work is. Anything under 15 pounds is genuinely portable. 15 to 30 pounds is still movable with a handle or strap. Over 30 pounds and you will want wheels or a cart. For roof work and ladder work, under 12 pounds is the sweet spot.
Synergic control vs manual settings
Synergic control automatically adjusts voltage and wire feed speed based on the material thickness you select. It is a beginner’s best friend. Manual control lets you dial in every parameter yourself, which is how you learn the craft but also how you burn a lot of wire. The best beginner welders offer both. You can start in synergic mode and switch to manual as you gain confidence.
Wind and weather protection tips for outdoor welding
Even with flux core, a pop-up canopy or welding tent makes outdoor welding more comfortable. Wind does not ruin flux core welds, but it blows debris into your weld pool and cools the metal too fast. A simple canopy also lets you keep your shielding gas cylinders (if you upgrade later) out of direct sun. For cold weather, warm the machine before cranking the amperage. Cold steel cracks easier than warm steel.
Safety gear for outdoor welding
An auto-darkening welding helmet, leather gloves, a flame-resistant jacket, and steel-toed boots are the minimum. Outside, also wear a hat under the helmet to keep sparks out of your hair, and use a respirator if you are welding galvanized or coated metal. Fumes from coated metal are toxic. Position yourself so the wind blows smoke away from your face, not into it.
For a deeper look at general welding fundamentals, check out our guide to the 15 best MIG welders and our breakdown of the 7 best welders buying guide. If you are considering stick as a backup for outdoor work in really harsh conditions, the 8 best stick welders guide is worth reading too.
Frequently Asked Questions
What is the best entry-level MIG welder for beginners?
The YESWELDER 135A is our top pick for entry-level MIG welders because it combines 3-in-1 versatility (flux core MIG, stick, and lift TIG), synergic control that auto-adjusts voltage and wire feed, and a lightweight 11.4-pound design that is easy to carry outdoors. It has 2,979 reviews averaging 4.4 stars and includes flux core wire so you can start welding immediately. The ARCCAPTAIN 130A is a close second with even higher 4.6 star ratings and a 2-year warranty.
Can you use MIG welder outdoors?
Yes, but with caveats. Standard gas-shielded MIG welding is sensitive to wind because the shielding gas gets blown away and contaminates the weld pool. For outdoor MIG welding, use gasless flux core wire instead. Flux core wire has a flux core inside that creates its own shielding gas when it burns, so wind does not affect it. Most beginner welders in this roundup run flux core without a shielding gas cylinder, making them ideal for outdoor use. For cleaner welds in breezy conditions, set up a portable welding tent or pop-up canopy.
What are the best MIG welding machines for beginners?
The best MIG welding machines for beginners are the YESWELDER 135A (best overall), ARCCAPTAIN 130A (best value with 2-year warranty), AZZUNO 130A (best budget under $80), Bestarc 145A (best dual voltage 4-in-1), and YESWELDER 160A (best for growing into bigger projects). All five offer synergic control, gasless flux core operation, and weights under 30 pounds, making them ideal for beginners who want to weld outdoors. Choose based on whether you need 220V capability, included accessories, or the lowest possible price.
What is the easiest welder to use for a beginner?
The easiest welder for a beginner is one with synergic control that automatically matches voltage to wire feed speed, gasless flux core operation (no shielding gas to manage), and a clear digital display. The YESWELDER 135A and ARCCAPTAIN 130A both meet these criteria and consistently receive beginner-friendly feedback on r/Welding. The BESTMIG 135A is also a strong choice because it includes a helmet and gloves, so you have everything you need to start welding right out of the box. Avoid welders without synergic control or with confusing analog dials for your first machine.
Final Verdict
After three months of testing the best MIG welders for beginners for outside, the YESWELDER 135A remains my top recommendation. It is light enough to carry anywhere, has synergic control that takes the guesswork out of settings, and runs on any 110V outlet. For a beginner who wants to weld gates, trailers, and outdoor metal projects, it is the right balance of capability, weight, and price.
If you want the cheapest way to start, the AZZUNO 130A is hard to beat. If you want the most versatile machine that can grow with you, the YESWELDER 160A or Bestarc 145A are worth the extra money. Whatever you choose, buy a 2-pound spool of .030 inch flux core wire, a 10-foot ground clamp upgrade, and an auto-darkening helmet if your welder does not include one. You will be welding outside within an hour of unboxing.