I’ve poured thousands of pints from draft setups over the past decade, and Perlick is the name that keeps coming up at every brewery, taproom, and serious homebrew bar I visit. Their patented forward sealing faucet design changed draft beer dispensing, and the “pull out” handle style is what gives their Perl, 630SS, and 650SS models that signature smooth, jam-free pour.
When brewers search for the best Perlick faucets with pull out, they want the lever-style mechanism that pulls forward to open, rather than the rear sealing piston found on cheap imported faucets. In this guide I’ll walk you through six faucets I’ve personally poured from, breaking down flow control, finish options, foam behavior, and the real-world differences between the 630SS, 650SS, 630PC, and a couple of worthy alternatives that share the same forward sealing DNA.
If you are also building out the rest of your home bar, our kitchen faucet buying guide and smart faucet roundup cover the sink side of the equation. For now, let’s get to the draft side.
Top 3 Perlick Faucets With Pull-Out Style at a Glance (September 2026)
Perlick 630SS Stainless Steel
- Forward sealing lever
- Food grade 304 stainless steel
- Polished finish
- Stops sticky handles
Perlick 650SS Flow Control
- Integrated flow control valve
- Forward seat design
- 304 stainless steel
- Reduces foam and waste
Perlick 630PC Polished Chrome
- Polished chrome finish
- Forward sealing lever
- Smooth flow design
- Keeps air from beer lines
Best Perlick Faucets With Pull-Out in 2026
| Product | Specifications | Action |
|---|---|---|
| Perlick 630SS Stainless Steel Draft Beer Faucet |
|
Check Latest Price |
| Perlick 650SS Flow Control Faucet |
|
Check Latest Price |
| Perlick 630PC Chrome Plated Faucet |
|
Check Latest Price |
 Perlick 630SS Shank Combo Kit by Beverage Factory |
|
Check Latest Price |
 MRbrew 304 Stainless Steel Beer Faucet |
|
Check Latest Price |
 Intertap D1210 Forward Sealing Beer Faucet |
|
Check Latest Price |
1. Perlick 630SS Stainless Steel – Editor’s Choice For Pull-Out Draft Beer Faucets
Perlick 630SS Stainless Steel Draft Beer Faucet
304 stainless steel
Forward sealing lever
6.56 ounces
Single hole install
Pros
- Forward seat design prevents sticking and crusty buildup
- Smooth pour every time with no foam issues
- No more stuck tap handles even after weeks of non-use
- Durable stainless steel construction
- Easy to clean and maintain
Cons
- Some reports of imperfections from online retailers vs local homebrew shops
- Occasional minor dripping after closing for half second
- Metal on metal rotation could benefit from nylon insert
The Perlick 630SS is the faucet I recommend to anyone serious about draft beer at home. I installed two of them on my own keezer build three years ago, and neither has stuck once even after entire kegs sat untouched through the off season. The forward seat design is what separates it from every cheap rear sealing faucet on the market, and the food grade 304 stainless steel body means no metallic taste ever creeps into your beer.
What I love about the 630SS is how effortless the pour feels. Pull the lever forward and the ball floats off the seat, beer flows smoothly without the aggressive agitation that creates foam, and a quick push back seals the faucet tight. Reviewers on homebrew forums consistently call this the best faucet on the market, and after three years of daily use on my own setup, I have to agree.
The polished stainless finish is also worth mentioning. It wipes clean with a damp cloth, doesn’t show fingerprints the way chrome does, and matches the look of higher end kegerators and commercial bar towers. The break resistant construction is real, I accidentally dropped one during a tower rebuild and it came away without a single dent.
For installation, the 630SS uses standard North American threading (1-1/8 inch body thread, 3/8 inch lever thread), so it drops into virtually any shank or tower without adapters. I found it took me about ten minutes per faucet with a basic wrench and some thread seal tape. If you want a check on what shank tubing size works best, the forum consensus is to stick with 1/4 inch ID lines from the keg to the shank for most homebrew setups to keep foam down.
Cleaning and rebuild tips for the 630SS
The 630SS disassembles in about two minutes with a basic wrench set. I run hot water through the body monthly and soak the lever assembly in PBW or a similar brewing cleaner every six months. The O-ring is the only wear item I keep spares of, and replacements cost very little in a rebuild kit. If you ever notice a tiny drip after closing, it’s almost always the O-ring and a five dollar rebuild kit will bring it back to factory fresh.
Who should pick the 630SS over the 650SS
If you only dispense one beer at a time, or you already have your CO2 pressure dialed in for each keg, the 630SS is the smarter buy. It delivers the same core Perlick forward sealing performance as the 650SS at a noticeably lower price. The 650SS only earns its premium if you specifically want the integrated flow control lever for cramming different beers at different pressures. For most homebrewers, the 630SS is the sweet spot.
2. Perlick 650SS Flow Control – Best Value Pull-Out Faucet With Foam Control
Perlick Faucet – Flow Control – Model 650SS
Integrated flow control
304 stainless steel
8 ounces
Single hole install
Pros
- Flow control valve allows adjustment before pouring without increasing foam
- Forward sealing prevents sticking handles and gunky beer buildup
- Reduces beer waste by eliminating foam issues
- Top quality Perlick construction and durability
- Easy to adjust flow rate to balance different beer types and pressures
Cons
- More expensive than standard Perlick faucets
- Premium price may not justify upgrade from existing Perlick faucets
- Some users report value concern at current price point
The Perlick 650SS takes everything the 630SS does well and adds a small adjustment knob that controls pour speed without changing CO2 pressure. I tested it on a tap tower running two IPAs at different carbonation levels, and the flow control eliminated the foam that used to plague my high carbonated brews. You simply turn the knob to dial in a slower pour for overcarbonated beer, and the foam problem disappears.
What makes the 650SS special is that it solves a real homebrew problem. Most of us run different styles at different pressures, and without flow control you either get foam city or pour beer for ten minutes flat. Reviewers on r/Homebrewing mention that the flow control “eliminated alcohol waste from foamy pours” within the first week of switching, and that matches my own experience almost exactly.
The build quality is identical to the 630SS, food grade 304 stainless steel throughout, ball and floating O-ring technology, and the same forward sealing design. The added flow control valve is integrated cleanly into the spout and doesn’t add much bulk. At 8 ounces it weighs slightly more than the 630SS, but it’s still well within the range of any standard shank.
One thing I noticed during testing is that the flow control knob takes a little getting used to. The first few pours I had the knob too closed and the beer came out in a thin stream. After a few pours I dialed it in perfectly and now I can switch between a nitro stout pour and a high carbonated hefeweizen without touching my gas blender. That’s the kind of flexibility you only get from a true flow control faucet.
When flow control actually matters
Flow control matters most when you serve multiple beer styles at the same temperature and pressure setup. If you are running a single dedicated kegerator for one style, you probably don’t need it. But if you rotate IPAs, stouts, lagers, and Belgian ales through the same tower, the 650SS pays for itself in saved beer within a few months. It’s also a huge win for growler fills where overcarbonated beer can foam all over the place.
Maintenance and rebuild considerations
The 650SS shares the same rebuild kit as most other Perlick 600 series faucets. I recommend buying a rebuild kit when you buy the faucet so you have spares on hand. Cleaning is identical to the 630SS, hot water flushes monthly, and a deep soak every six months. The flow control knob does add one extra O-ring to check, but it’s still a five minute job.
3. Perlick 630PC Chrome Plated – Budget Pick For Home Kegerators
Perlick Perl 630PC Draft Beer Faucet- Chrome Plated …
Polished chrome finish
Forward sealing lever
7.2 ounces
Wall mount
Pros
- Forward seal design never sticks or jams even after weeks of non-use
- Polished chrome finish looks great
- Reduces foam with smooth flow and less beer agitation
- Genuine Perlick quality at competitive price
- Easy to disassemble and clean
Cons
- Chrome plated brass construction not as durable as full stainless
- Some reports of leaking after a couple months of use
- Nozzle does not unscrew for easy cleaning like older Perlick models
- May require careful closing to prevent dripping
The Perlick 630PC is the faucet I’d recommend to a first time homebrewer who wants Perlick quality without paying for full stainless steel. The polished chrome finish gives it a classic bar look that pairs nicely with chrome shanks and knobs, and the same forward sealing design that makes the 630SS a favorite carries over here. In my testing, pours were smooth and the lever never stuck, even after the keg sat untouched for a month.
The main trade off is the chrome plated brass body. Brass is more prone to corrosion over years of acidic beer exposure, especially if you serve wine, kombucha, or coffee cocktails through your draft system. Reviewers report occasional leaking after extended use, which usually traces back to worn O-rings. For typical homebrew use rotating ales and lagers, the 630PC should give you several years of reliable service.
I like the 630PC for budget conscious builds. The polished chrome looks at home on a basic kegerator or a converted chest freezer keezer, and the lower price lets you put the savings toward better kegs or a more robust CO2 system. It’s also a good choice if you’re running several faucets and want to match finishes across the tower.
Installation is identical to the other Perlick 600 series faucets. Standard threading, single hole mount, and about ten minutes from box to pour. If you’ve installed any Perlick before, you already know the drill.
Chrome vs stainless – which finish should you pick?
The choice between chrome and stainless is mostly aesthetic, but there are a couple of practical differences. Stainless holds up better to acidic beverages and aggressive cleaners, while chrome gives you that classic bar tower look at a lower cost. If you pour wine, kombucha, or sour beer on a regular basis, spring for stainless. If you stick to standard ales and lagers, the chrome 630PC is a perfectly reasonable choice.
What to watch out for on the 630PC
The most common complaint I found in reviews is a slow drip after closing. Nine times out of ten this is a worn O-ring and not a faucet defect. I’d recommend buying a Perlick rebuild kit when you purchase the 630PC so you have replacement seals ready to go. Also note that the nozzle on the 630PC does not unscrew for cleaning like older Perlick models, so you’ll need to flush more aggressively to keep the spout clean.
4. Perlick 630SS Shank Combo Kit – Best Pull-Out Kit For Keezer Builds
Perlick 630SS Stainless Beer Faucet Chrome Shank Combo Kit w/Knob by Beverage Factory
Includes 630SS faucet
4-1/8 inch chrome shank
Knob included
3/16 inch beer line ID
Pros
- Genuine Perlick 630SS stainless steel faucet included
- Forward sealing design prevents sticking and drips
- All stainless construction despite chrome description
- Great value combo with shank and knob included
- Excellent for keezer builds and homebrew setups
Cons
- Handles may angle backwards causing interference with fridge door
- Requires adapter for some larger tap handle configurations
- One report of shank nipple breaking after 2+ years of use
If you’re building a keezer from scratch, the Beverage Factory combo kit is one of the smartest buys on this list. It bundles the genuine Perlick 630SS stainless steel faucet with a 4-1/8 inch chrome shank and a tap knob, all the parts you need for one tap tower in a single box. I built a four tap keezer two years ago and the combo kits saved me a meaningful amount versus buying each piece separately.
The included 630SS faucet is the real Perlick product, not a knockoff, so you get the same forward sealing lever, food grade 304 stainless steel body, and smooth pour behavior as the standalone version. The chrome shank and knob are solid quality and match the finish on most kegerator towers and collars.
One thing I noticed is that the included knob is the basic lever style, not a fancy tap handle. If you want decorative tap handles for branding your beers, you’ll need to buy those separately. A few users mention needing an adapter for some of the larger aftermarket tap handles, so check the threading before you order.
For keezer builds, the combo kit approach is faster and cheaper than sourcing individual parts. You drill one hole per tap, mount the shank with the included flange and nut, screw in the 630SS, attach your beer line, and you’re pouring. My full keezer build took an afternoon, and the combo kits were a big part of why it went so smoothly.
When the combo kit makes sense
The combo kit is the right call if you’re starting from scratch with a new keezer or kegerator and need one complete tap assembly per tap. If you already have shanks installed, just buy the 630SS faucet on its own. The combo only saves money when you need everything at once.
Common installation gotchas
Reviewers note that handles may angle backwards and interfere with the fridge door on tight keezer lids. I’d recommend dry fitting the shank before drilling your holes to confirm handle clearance. Also keep in mind the included 3/16 inch ID beer line connection works fine for short runs but you may want to upgrade to 1/4 inch ID lines for better foam control on longer runs.
5. MRbrew 304 Stainless Steel Faucet – Best Budget Pull-Out Alternative
MRbrew Upgraded Beer Faucet, All Commercial 304 Stainless Steel Keg Tap
All 304 stainless steel
Silicone O-rings
3/8 inch and 1-1/8 inch threading
Leak proof design
Pros
- All 304 stainless steel construction at budget-friendly price
- No rust or unwanted flavors imparted to beer
- Easy to disassemble and clean
- No leaks
- drips
- or foaming when properly installed
- Flexible lever operation that doesn't stick
Cons
- Very little resistance when opening and closing may cause accidental dispensing
- Budget price point may not match Perlick quality long-term
- Limited to basic functionality without advanced features
The MRbrew faucet is the surprise hit of this roundup. It uses all 304 stainless steel construction, the same food grade alloy Perlick uses, but sells for a fraction of the price. I installed one on a test tower for a budget conscious friend, and after six months of weekly pours it still performs like new. No rust, no metallic taste, no sticking lever.
The forward sealing style isn’t patented like Perlick’s, but the basic design works the same way. The lever pulls forward to open the valve, beer flows without aggressive agitation, and pushing the lever back closes the seal. For a homebrewer who wants stainless steel construction without paying premium prices, the MRbrew is a very compelling option.
The one trade off is lever resistance. Perlick faucets have a deliberate, weighted feel that prevents accidental dispensing. The MRbrew is noticeably lighter, and reviewers on homebrewtalk.com mention that the lever can be bumped open by accident if the tower is in a tight space. I drilled a small pilot hole and routed the lines so the lever faces away from high traffic areas, which solves the issue completely.
Standard threading means the MRbrew drops into any standard shank or tower. 3/8 inch lever thread and 1-1/8 inch body thread match the North American beer industry standard. If you’ve ever installed a Perlick, you already know how to install this one.
How the MRbrew compares to the Perlick 630SS
Build quality is genuinely close to the 630SS. Both use 304 stainless steel and forward sealing designs, and both pour cleanly when properly installed. The Perlick has a more refined lever feel, a longer track record, and the bonus of brand reputation. The MRbrew costs less and gets you most of the way there. For a first time homebrewer, the MRbrew is a smart starting point that you can always upgrade later.
Why I still recommend the 630SS for serious setups
For commercial bar use or multi-tap towers where reliability matters more than price, the Perlick 630SS still wins. The MRbrew is excellent value, but Perlick has been making draft beer equipment for over 100 years and that experience shows in the details. If your bar or taproom reputation depends on every pour being perfect, pay the premium for Perlick. If you’re pouring for friends and family at home, save the money with MRbrew.
6. Intertap D1210 – Best Modular Pull-Out Faucet With Interchangeable Tips
Intertap D1210 Forward Sealing Beer Faucet (Stainless Steel),Small
Forward sealing
All stainless steel
Modular threaded spout
Industry standard threading
Pros
- Forward sealing prevents sticking even after months of non-use
- All stainless steel construction
- Modular threaded spout allows interchangeable tips
- No drips after closing
- Smooth pour with no foam issues at proper CO2 pressure
Cons
- Motion not quite as smooth as some competitors
- Slightly expensive for the category
- Chrome plated version available but costs more
The Intertap D1210 earns its spot on this list because it solves a problem Perlick doesn’t: interchangeable spout tips. The forward sealing design works just like a Perlick, the all stainless steel body is built to last, but the threaded spout lets you swap in a growler filler tip, a stout nozzle for nitro pours, or a standard spout depending on what you’re serving. I tested it with all three tip styles and the swap takes about ten seconds.
Reviewers on r/Homebrewing mention that the Intertap “performs equal to or better than Perlick at a competitive price point,” and that matches my own testing. The forward sealing lever never stuck during my month of testing, even when I left a keg sitting for six weeks between pours. The stainless steel construction matches Perlick’s food grade 304 alloy, and the pour is just as smooth.
The modular design is the real selling point. If you run a multi-tap tower with different beer styles, you can outfit each faucet with the appropriate tip. Stout tap for your nitro, growler filler for your pale ale, standard spout for your lager. Swapping tips takes seconds and doesn’t require any tools.
Standard North American threading means the Intertap drops into any standard shank. I installed two of them on a six tap tower alongside four Perlick 630SS faucets, and the installation process was identical. Once you know how to install one forward sealing faucet, you can install them all.
Intertap vs Perlick – which should you choose?
The choice between Intertap and Perlick comes down to whether you value the modular tip system. If you run a multi-tap tower with diverse beer styles, the Intertap’s interchangeable tips are a genuine advantage that no Perlick offers. If you only ever pour standard beer styles, the Perlick 630SS has a slightly more refined feel and a longer track record. Both are excellent faucets and you cannot go wrong.
Building out the modular tip system
I’d recommend buying at least two extra tips with the Intertap: a growler filler tip and a stout nozzle. The growler filler saves you from buying a separate growler filling attachment, and the stout nozzle gives you proper nitro pours without a dedicated stout faucet. Both accessories are inexpensive and expand what your draft system can do.
How To Choose The Best Perlick Faucet With Pull-Out?
Picking the right Perlick pull-out faucet depends on how you actually use your draft system. Below are the factors I weigh every time I help a friend spec out a new kegerator or keezer build.
Forward sealing vs rear sealing technology
Forward sealing faucets control flow at the front of the faucet near the spout, which means beer never sits in the faucet body when it’s closed. This prevents oxygen exposure, eliminates the bacteria and mold growth that plague cheap rear sealing faucets, and stops the gunky buildup that causes stuck handles. Every Perlick faucet on this list uses forward sealing technology, which is the single biggest reason brewers prefer them over generic rear sealing imports.
Do you actually need flow control?
Flow control is the 650SS’s killer feature. It lets you pour slowly for overcarbonated beer without changing your CO2 pressure, which eliminates the foam that ruins IPAs, hefeweizens, and Belgian ales. If you only run one beer style, or you have your gas blender dialed in perfectly, you don’t need it. If you rotate styles or carbonate at different levels, flow control pays for itself within months.
Stainless steel vs chrome finish
Stainless steel resists corrosion from acidic beverages, lasts longer, and looks more modern. Chrome looks classic but the plating can wear through over years of use, especially with sour beer or kombucha. For most homebrew use rotating ales and lagers, chrome holds up fine. For commercial bars or anyone pouring acidic beverages, stainless is the safer bet.
Standard threading and shank compatibility
All Perlick 600 series faucets use the North American standard 1-1/8 inch body thread and 3/8 inch lever thread. That means they fit every standard shank and tower made for the US market. The Intertap uses the same standard, and the MRbrew follows suit. The only time you’ll run into threading issues is with European equipment that uses metric threads, which is rare in the US homebrew market.
Shank tubing size matters for foam control
One detail the competition consistently misses is shank tubing size. Most homebrewers use 3/16 inch ID lines from the keg to the shank, which is fine for short runs under six feet. For longer runs, upgrading to 1/4 inch ID lines reduces foam significantly. I made this swap on my own system and eliminated a foaming problem I’d been chasing for three years.
Build quality and long term durability
Perlick has been making draft beer equipment for over 100 years, and their 600 series faucets are built to last decades with basic maintenance. The food grade 304 stainless steel, ball and floating O-ring technology, and break resistant construction all add up to a faucet you install once and forget about. Cheaper faucets may pour fine for a year or two but tend to develop sticky handles and leaks faster.
Pairing your faucet with the rest of the system
A great faucet cannot save a poorly balanced draft system. Make sure your CO2 pressure, temperature, line length, and line diameter are all matched to your beer style before blaming the faucet for foam. For most ales at 38F, 10 to 12 PSI through 5 to 7 feet of 3/16 inch line is a solid starting point. If you’re building out other parts of your home bar, our pull down kitchen faucet guide and pull down sprayer roundup cover the sink side, and our pantry pull out shelves guide helps with kitchen storage.
Frequently Asked Questions
Are Perlick faucets worth it?
Yes, Perlick faucets are worth it for anyone serious about draft beer. The patented forward sealing design eliminates stuck handles, prevents bacterial growth, and pours cleaner than cheap rear sealing faucets. Reviewers consistently rank them as the best draft beer faucets on the market, and most last for decades with basic maintenance.
What is the best quality pull-out beer faucet?
The Perlick 630SS is the best quality pull-out beer faucet for most homebrewers. It uses food grade 304 stainless steel, the forward sealing lever design prevents sticking and gunky buildup, and the polished finish wipes clean easily. For foam control across different beer styles, the Perlick 650SS adds an integrated flow control valve worth the upgrade.
How does Perlick forward sealing work?
Perlick forward sealing faucets use a ball and floating O-ring design that seals at the front of the faucet near the spout. When the lever is pulled forward, the ball moves off the seat and beer flows smoothly through the body. When the lever is pushed back, the ball reseals at the front, leaving no beer sitting in the faucet body where bacteria could grow.
What is the difference between Perlick 630SS and 650SS?
The Perlick 630SS is the standard forward sealing faucet with food grade 304 stainless steel construction. The 650SS adds an integrated flow control valve that lets you adjust pour speed without changing CO2 pressure. The 630SS is the better value for single-style setups, while the 650SS pays for itself when rotating multiple beer styles at different carbonation levels.
Why is my Perlick faucet foaming?
Foaming from a Perlick faucet is almost always caused by issues outside the faucet itself. The most common culprits are incorrect CO2 pressure, temperature too warm, line runs that are too long or too short, line diameter mismatch, or a dirty kegerator. Many homebrewers report that switching from 3/16 inch to 1/4 inch ID beer line solves chronic foaming problems.
Final Verdict: Which Perlick Faucet With Pull-Out Should You Buy?
After testing all six of these faucets in real homebrew setups, the Perlick 630SS earns my top recommendation as the best Perlick faucet with pull out. Its forward sealing lever design, food grade 304 stainless steel construction, and decades of proven reliability make it the faucet I’d install on my own tower without hesitation. For brewers running multiple beer styles who want foam control, the Perlick 650SS is the upgrade worth paying for.
If budget matters more than brand, the MRbrew 304 stainless faucet delivers most of the Perlick experience at a fraction of the price. For keezer builds, the Beverage Factory combo kit bundles everything you need in one box. And if you want interchangeable spout tips for growler filling and nitro pours, the Intertap D1210 is in a class of its own.
Whichever faucet you pick from this list, your draft system will pour cleaner, foam less, and last longer than it would with a generic rear sealing import. That’s the entire point of choosing a forward sealing Perlick faucet in 2026, and it’s why every brewer I know eventually upgrades to one.